This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.
You are not logged in.
Clare
If you haven't located the foam yet, there are several places down here (U.S.) such as WestMarine.com, JamestownDistributors.com & C-Mesales.com. Both of the last two are in NY. BoatersWorld.com and more that have the material. These all have web sites. You might do a search for Poly-U-Foam or Evercoat Foam. Also FoamPower.com makes a Handi-Foam SR (Slow Rise) for marine applications. Hope this helps.Scott Schoeler, MKIII, "Scot-Free"
Mark</SPAN>
</SPAN>If you're replacing the original metallic fuel tank with a cast polyethylene tank you will also likely need to replace several other system components. </SPAN>Replacing the gas fuel tank and fuel system components it is entirely within the capability of many DIY owners and clearly you feel up to the re-fit. However, as Mr. Weatherson suggests, you should be aware of the proper installation procedures and practices of this critical piece of equipment.</SPAN>
</SPAN>There are several controlling authorities that list requirements for gasoline fuel tank installations. The USCG (United States Coast Guard) CFR (Code of Federal Regulations) 33, subpart J, Sections 183.501 - 183.590 provide legal requirements. </SPAN>The NFPA (National Fire Protection Agency) has also issued detailed requirements for safe installation of gasoline fuel systems. And finally the ABYC (American Boat and Yachting Council) issues Standards and Technical Information Reports for Small Craft</SPAN> which is a consensus of representative of government, industry and public sectors and they are used as a guide to aid the manufacturer, the consumer and the general public in the design, construction, equipage and maintenance of small craft. </SPAN>These standards (ABYC) are internationally recognized as the Best Practices for the marine industry. </SPAN>An entire section (ABYC H-24) is dedicated to the proper installation of gasoline fuel systems, including tanks, fill hoses, fuel lines, connections, vents, etc.</SPAN>
</SPAN>I certainly DON'T want to discourage you from the project by scaring you with a flood of detailed requirements but rather advocate the job be completed the safest method possible. </SPAN>I encourage you to seek the help of a qualified professional who can offer guidance based on the above standards. That way you can provide your insurance company with documentation regarding your re-fit if asked and more importantly, you will have peace of mind that the fuel system is installed correctly and safely.</SPAN>Scott Schoeler, MKIII, "Scot-Free"