C&C 27 Association Forum

This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.

You are not logged in.

Announcement

if you need to reset your password, you will have to confirm the request clicking the URL in the email that you will receive (Just in case check the spam folder)
If you have any problem, please do not hesitate to contact me

#1 2007-10-09 10:18:41

WIGMAN
Member

1976 mark 3 parts

I am cutting up the boat and have a lot of parts

Offline

#2 2007-10-09 22:04:33

KenPole
Member

Re: 1976 mark 3 parts

Seriously interested in transom-mounted ladder, if you have one; lifeline stanchions and forward hatch. I'm at kenpoleatrogerscom (needs "at" symbol and period before com).
Ken Pole
1975 Mark III Santiva
Ottawa


Ken Pole, Ottawa
1975 Mark III Santiva

Offline

#3 2007-10-09 22:48:12

Guest

Re: 1976 mark 3 parts

Hi.  Is there a stainless steel galley sink?  What size - length, width and depth?  Barry

#4 2007-10-10 03:58:47

chriswheat
Member

Re: 1976 mark 3 parts

My recently purchsed Mark one is missing a section of the luff track about 2 inches long, no doubt where one inserts the nylon slides which are sewn onto the mainsail. After poking around on rigrite.com I believe the track I have is "Kenyon Cruising Section Luff Track". If anyone knows where I can get a slice of track it would be great to have.
Chris Ferrier
Second Wind


Chriswheat Second Wind
Chesapeake Bay MD

Offline

#5 2007-10-10 09:31:08

Aragorn
Member

Re: 1976 mark 3 parts

Hi WIGMAN,
  What is the type and condition of the 2 primary winches. I have Barient #18's (two speed) and they've seen quite a lot of use. Also , where are you located.
Thanx, Clare Jordan, Aragorn  e-mail --   bosco "at" ripnet dot com


<U>SAIL FOR SALE </U>_
#2 Genoa for 27' Mk.111 by North Sails . Tri-radial cut, Norlam fabric, built 1998-- good shape . Window, tell-tales and draught stripe. Stitching etc. checked ;2001/2002 . #6 Luff tape .
Replacement Genoa is on order for 2004 racing season but there's some cruising years left in this one -$ 550 asking price. phone 613 498-2029 or e-mail <A href="mailto:bosco@ripnet.com">bosco@ripnet.com</A> <img src="emoticons/icon_frown.gif">Brockville)
;
;

Offline

#6 2007-10-10 10:43:37

WIGMAN
Member

Re: 1976 mark 3 parts

hi ken there is no latter but the hatch is there and some of the stantions are bent but all the bases are good call 609 296 8713

Offline

#7 2007-10-10 10:45:46

WIGMAN
Member

Re: 1976 mark 3 parts

yes 11 3/4 x 15 3/4 x 5
                 thanks mike

Offline

#8 2007-10-10 10:47:30

WIGMAN
Member

Re: 1976 mark 3 parts

sorry do not have
that part
                   thanks mike

Offline

#9 2007-10-10 10:56:09

WIGMAN
Member

Re: 1976 mark 3 parts

boat has two barient 10 on cabin top in good shape,two lewmar england two speed 40 crome is peeling,two barient 16 stainless in good shape i am in west creek creek nj
       

                                                        thanks mike

Offline

#10 2007-10-11 11:22:23

Guest

Re: 1976 mark 3 parts

Thanks.  Same as mine.  I was looking for a deeper one.  Barry

#11 2007-10-12 02:21:55

Guest

Re: 1976 mark 3 parts

<BLOCKQUOTE>"WIGMAN wrote:<!--%BR%-->
I am cutting up the boat and have a lot of parts"</BLOCKQUOTE>
Sorry to hear of the demise of your boat.
If they are original, I would be interested in the two stern castings and maybe the lower shroud turnbuckles. If you could send me pics and prices to jfteig at aol dot com.
Thanks

#12 2007-10-14 07:06:32

chriswheat
Member

Re: 1976 mark 3 parts

Just went to the boat today to find the rudder missing! It was quite windy several days ago & apparently all the bolts and fittings at the top of the rudder post worked loose, and it just fell out and sank. Do you still have a rudder for sale?
Chris Ferrier


Chriswheat Second Wind
Chesapeake Bay MD

Offline

#13 2007-10-14 09:53:48

Guest

Re: 1976 mark 3 parts

hi chris give me a call 609-296-8713

#14 2007-10-18 03:22:14

Guest

Re: 1976 mark 3 parts

hello frm the ROCK.
sorry about your boat. I need the left hand side stern casting for my "new" 30  year old '77 c&c.
thanks steve.
you can e-mail me at home with info. thanks again.
<A href="mailto:stevep@nl.rogers.com">stevep@nl.rogers.com</A>

#15 2007-10-18 12:53:52

WIGMAN
Member

Re: 1976 mark 3 parts

sorry i sold those already
                          thanks mike

Offline

#16 2007-10-23 09:45:46

pura vida
Member

Re: 1976 mark 3 parts

Steve,
Did you get my email? I believe I have the port fair lead casting.
Mike M
SV Wind Horse
#375
Galveston, Tx


Mike M
SV Wind Horse
#375
Galveston, Tx

Offline

#17 2007-10-25 00:45:57

Guest

Re: 1976 mark 3 parts

hello mike:
thanks for your reply.
do  you have a pic.  and  price for  the casting?
sorry, just got you e-mail.
<A href="mailto:stevep@nl.rogers.com">stevep@nl.rogers.com</A>

#18 2007-10-26 01:28:40

phillips
Member

Re: 1976 mark 3 parts

Does your boat have a wheel or tiller?

Offline

#19 2007-10-26 03:23:56

WIGMAN
Member

Re: 1976 mark 3 parts

the boat has a wheel

Offline

#20 2007-10-26 22:53:20

phillips
Member

Re: 1976 mark 3 parts

Can I get you to send me an email with some pictures and some more information on the wheel. andrewphillips(at)hfx.eastlink.ca

Last edited by (2007-10-29 08:54:45)

Offline

#21 2007-10-27 06:11:48

Guest

Re: 1976 mark 3 parts

did you get the pics

#22 2007-10-27 08:05:31

Guest

Re: 1976 mark 3 parts

mike M:
did you get my e-mail?
Info. about the port stern casting?
thanks steve p.

#23 2007-10-29 01:32:22

Guest

Re: 1976 mark 3 parts

Mike, did you have a split backstay?  If so, do you have the aluminum castings which C&C used to replace part of the teak caprail at the stern?  These were positioned just inboard of the corner castings and were used to provide a crushproof mount for the U-bolts (or V-bolts) that the split backstay ends would be fastened to.  If available, I would be interested in those castings and the matching V-bolts.  Also, what style of boom did you have?  That and the gooseneck mount from the mast may also be of interest to me.  If you have an Atomic IV, you might want to see if Moyer Marine is interested in it for reconditioning. Thanks,

Marcus
(carriden(at)cogeco.ca)

#24 2007-10-31 02:13:51

Guest

Re: 1976 mark 3 parts

I might be interested in all or part of the stearing pedistal if it is the same as mine.  I have the edson system with the gas on the starboard and the shifter on the port side.  The casting for the shifter on mine is broken, is yours still in one piece?  If you have pictures, please email to cphippen  (at) utilitieskingston.com

#25 2007-11-01 06:22:06

pura vida
Member

Re: 1976 mark 3 parts

Steve,
Sorry, I have been away. I am going to the boat toomorrow and will send you photos and the pricing. I am asking what I paid.
Mike M
SV Wind Horse
#375
Galveston, Tx


Mike M
SV Wind Horse
#375
Galveston, Tx

Offline

Board footer

Powered by FluxBB