C&C 27 Association Forum

This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.

You are not logged in.

Announcement

if you need to reset your password, you will have to confirm the request clicking the URL in the email that you will receive (Just in case check the spam folder)
If you have any problem, please do not hesitate to contact me

#1 2013-06-04 07:21:41

c&c27dyc
Member

Loos Rig Gauge

Has anyone used the Loos Rig Gauge for their shrouds? If so, do you recommend 35 for the upper, 33 for the lower forward and 30 for the lower aft? Cheers, Dean


Dean M Baldwin
Morgan "D"
Mark III - Hull 516
North Sydney, N.S.


Dean M Baldwin
Morgan "D"
Mark III - Hull 516
North Sydney, N.S.

Offline

#2 2013-06-05 23:57:36

sony2000
Member

Re: Loos Rig Gauge

On my C&C 29 I achieved 15% on the back stay, and have only gone to 10% on the sides. Heavier winds will show if I need more on the sides.

Offline

#3 2013-06-10 12:40:27

ALAN FORD
Member

Re: Loos Rig Gauge

Dean, I use my Loos gauge on SMOKE, but she is a Mk V, so perhaps not so relevant to your Mk III. I go to 34 on both uppers and lowers, with the intermediates just hand tight.
Alan of SMOKE 1984 Mk V 002


Alan of SMOKE 1984 Mk V 002

Offline

Board footer

Powered by FluxBB