This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.
You are not logged in.
Pages: 1
For Sale:
Mark 1 Unit 0 Harken furling gear. Originally installed on a C&C 27 Mark III.
Drum assembly, integral turnbuckle, 7/16" diameter toggle, torque tube, halyard swivel.
Approximately 37-1/2 feet total length, but the top 4-inches or so of the foil is damaged. The foil is still assembled and the forestay is still installed but the top portion of the forestay is damaged as well. Foil would have to be trimmed back to a shorter length and new forestay installed. However, when it was removed from the boat, there was some spare foil length under the bottom collar.
The furler is date stamped 1993 but the rigger who installed my new unit deemed this one to be in very good condition.
Located in Sidney, British Columbia ... 5-minute walk down the road to a local marina, so easy to transport the furler to your boat.
Asking $400
North Saanich, B.C.
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
Offline
Any interest in disassembling, boxing up, and shipping it? I would realize that the cost would increase for that. I can be reached at: one more jeff at g mail dot com. No spaces in the email.
Thanks,
Jeff
C&C 27 Mk I #4
Clockwork
Port Stanley, On.
C&C 27 Mk I #4
Clockwork
Port Stanley, On.
Offline
Email sent
North Saanich, B.C.
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
Offline
Still available.
North Saanich, B.C.
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
Offline
Hi, I'm interested....I'm just looking into what would need to be done to make this work for me....I also have a C&C 27 mk 3.
Robin
Berceau - Mk III
Quadra Island, BC
Robin
Berceau - Mk III
Quadra Island, BC
Offline
Do you need to have your headsails recut and converted from hank-on? If so it most likely gets easier as you wouldn't need to find any additional foil since lost 6-inches or so from damaged section could be accounted for in the sail. Also if your forestay is new(er) I think it could be shortened and new swaged eye installed since length is reduced to account for the drum and toggle.
See my ad on usedvictoria for pictures and more info.
North Saanich, B.C.
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
Offline
No, I wouldn't alter my current headsail, it's ripped but repairable so I'll repair and keep it for interim use. My working jib and main are also old and in need of replacement due to duct-taped rips and lack of tear strength so I am looking into ordering new sails, This is just part of my research, you know, shall I go from hank-on to furling at this point?
My forestay is the original.
Robin
Berceau - Mk III
Quadra Island, BC
Robin
Berceau - Mk III
Quadra Island, BC
Offline
Well with an original forestay ... I'd look at replacing it.
Doyle sails in Nanoose would be the closest to you ... but don't forget UK Sails and Leitch & McBride down here in Sidney. Leitch & McBride did a real nice job on my genoa last year.
North Saanich, B.C.
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
Offline
Thanks - I'm in touch with Blanchard rigging and will get back to you.
Robin
Berceau - Mk III
Quadra Island, BC
[Our Forum software is older-generation and does not give good feedback when it's digesting a post. Please give it a minute before clicking 'Submit' a second time to avoid creating multiple posts. Duplicate post is now deleted. - Admin]
Last edited by (2015-02-16 06:20:38)
Robin
Berceau - Mk III
Quadra Island, BC
Offline
Thanks - I'm in touch with Blanchard rigging and will get back to you.
Robin
Berceau - Mk III
Quadra Island, BC
Last edited by (2015-02-16 06:20:47)
Robin
Berceau - Mk III
Quadra Island, BC
Offline
Can you email me contact details please at r62e at Hotmail dot com because I'm thinking of coming down with a friend to have a look.
Thanks
Robin
Berceau - Mk III
Quadra Island, BC
Robin
Berceau - Mk III
Quadra Island, BC
Offline
Email sent
North Saanich, B.C.
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
Offline
Sorry about this but can you check the email address that you sent a reply too because I haven't received it yet?
Thanks
Robin
Berceau - Mk III
Quadra Island, BC
Robin
Berceau - Mk III
Quadra Island, BC
Offline
Another email sent.
You can use the usedvictoria.com listing for the furler and respond to the ad to get in touch.
http://www.usedvictoria.com/classified-ad/Harken-Roller-Furling_21795309
North Saanich, B.C.
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
Offline
Sold!
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
1979 C&C 27 MkIII, Hull No. 780
Cygnet
North Saanich, BC
Offline
Pages: 1